Position:
Regional manager in charge of sales and technical assistance for the northwest
region of Colombia. Responsible for major projects such as the Medellín Public
Transit train, Cerromatoso, Cerrejón, cement plants, steel mills, paper mills,
etc.
Juan
Guillermo Pardo Ochoa has ample experience as an engineering consultant,
including:
-
EE.PP.M 2000 - Design,
manufacture and set-up of the automated and mechanical model for the apartment
of the future at the public utilities interactive center. Under construction.
-
HOLASA S.A. 2000 - Design
and construction of sheet metal
pack turner. Under construction.
-
COOMERCA PLAZA MINORISTA
2000 - Auditing the design, construction , assembly and start-up of a compost
turning machine. Under construction.
-
NEW STETIC S.A. 2000 -
Design, construction and set-up of the mechanically operated storage system.
-
CORRUGADOS DEL DARIEN
(Apartadó) 2000 - Design, construction and
set up of a compact spare parts storage system.
-
LEONISA S.A. 2000 - Design
and construction of an electrohydraulic stationary lift.
-
ELECTROPORCELANA GAMMA 1999
- Design, construction and set up
of an electrohydraulic stacking platform.
-
INDUSTRIAS METALURGICAS
APOLO S.A. 1999 - Recovery of a 4.5 m, 200-ton electromechanical Cincinnati
shear.
-
PAVICOL 1999 - Recovery of
horizontal counter-rotating shaft, positive displacement screens.
-
CONCONCRETO S.A. 1999 -
Design and construction of winders
for the wire drawing operation.
-
UNIVERSIDAD EAFIT 1999 -
Design and construction of rolling
shelf book storage solutions.
-
METROSEGURIDAD 1999 -
Design, construction and set-up of
a compact rolling document storage system.
-
BANCO ANGLOCOLOMBIANO 1998
- Design, construction and set-up
of a compact rolling document storage system.
-
TULTEX 1998 - Design,
construction and testing of a 1-ton
electrohydraulic elevator.
-
PASTOS Y GANADOS 1998 -
Re-design and recovery of 220-HP grass pelletizing presses.
-
SERVICIOS GENERALES DE
INGENIERIA (Medellín) 1997 - Three-stop electromechanical 1500 kg lift for
EPM. E.P.S.
-
ELECTROPORCELANA GAMMA 1997
- Design and construction of the thermal cycle aging (-40° + 40°) testing
system under sustained load for high voltage insulation. Equipment and tests
certified in Italy.
-
Design of a numerically
controlled copying lathe for ceramic parts; this design involved over 200
drawings.
-
COMPAÑIA SIDERURGICA
NACIONAL (Rio de Janeiro, Brazil) 1995 - Consultant for the recovery of the
sheet metal accumulator.
-
CEMENTOS LIMA 1995 -
Re-design of the 20 m2-vibrating screen.
-
ELECTROPORCELANA GAMMA 1995
- Design and construction of a high
voltage insulator assembly machine.
-
CONCONCRETO S.A. 1995. -
Overhaul of CIFA concrete mixer.
-
INCOAL 1994 - Design and
construction of hydraulic table for
semi-continuos casting.
-
MIA LTDA 1994 - Design of
model for casting the jacket for a 20.000 HP marine engine.
-
CANTERA LA VALERIA 1994 -
Recovery of a jaw crusher.
-
INEXTRA 1993
Design and construction of
stainless steel agitation group for high viscosity raw materials.
-
CARBOPLAST 1991 -
Automation of an 11-ton plastic press with three degrees of freedom.
-
ECOPETROL 1991 - Procedure
design, construction and
implementation of stainless steel roll for a 220 HP @ 3600 r.p.m. turboblower,
in addition to installation and start-up.
-
PAVICOL 1990 - Recovery and
upgrade of jaw and cone crushers in several sizes, and construction
of the required parts. The brand names included: Universal, Symons,
Nordberg, Faco Allis Chalmers, Telsmith and lokomo.
-
PAPELES DEL NORTE
(Barranquilla) 1990 - Re-conversion of the paper mill; conversion from bushings
to bearings of the 40-ton calender roll; included design, construction
and set-up of the journals weighing 1 ton each. This allowed for a 30%
increase in productivity and improved paper quality,
-
CONASFALTOS 1990 - Design,
construction and set-up of vibrator
for 10 m screen.
-
TRITURADOS MONTE VERDE 1989
– Re-conversion of the double toggle Headfield crusher from bushings to
bearings.
-
SUMICOL 1987 - Design and
construction of journals for
submerged transmissions.
-
PROCOPAL S.A. 1984 -
Recovery of the Faco Allis Chalmers 1.2 m cone from axial bearings to ball and
socket.
-
SOLLA LTDA 1979-1981 - Head
of maintenance and project assistant.
-
Mechanical design and
reconversion of equipment for crushing, concrete and asphalt plants, and the
food, ceramics, plastics and steel industries since 1994.
-
Own development and design
of lab equipment, elevator, transport and storage systems since 1990.
-
Own development and design
of compact rolling shelving, since 1997.
